User Guide

Chapter 6 Configuring authentication 293
Nortel Secure Network Access Switch 4050 User Guide
The new LDAP server is automatically assigned a unique index number, and
appears in the LDAP Server Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Reordering additional LDAP servers
To adjust the order in which LDAP servers are used, perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
ldap > LDAP Servers tab.
The LDAP Servers screen appears (see Figure 69 on page 291).
2 Select an LDAP server entry from the LDAP Server Table.
3 Use the up and down arrows to reposition the selected entry.
4 Click Apply on the toolbar to accept the new order, and adjust index numbers
for the LDAP servers accordingly. Click Commit on the toolbar to save the
changes permanently.
Removing an LDAP server
To remove an existing LDAP server from the LDAP Server Table, perform the
following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
ldap > LDAP Servers tab.
The LDAP Servers screen appears (see Figure 69 on page 291).
2 Select an LDAP server entry from the LDAP Server Table.
3 Click Delete.
A confirmation dialog appears.
4 Click Yes.
The LDAP server is removed from the LDAP Server Table.