User Guide

296 Chapter 6 Configuring authentication
320818-A
Adding LDAP macros
To create an LDAP macro variable, perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
ldap > LDAP Macros tab.
The LDAP Macros screen appears (see Figure 71 on page 295).
2 Click Add.
The Add an LDAP Macro dialog box appears (see Figure 72).
Figure 72
Add an LDAP Macro
3 Enter the LDAP macro information in the applicable fields.
Table 48 describes the Add an LDAP Macro fields.
Table 48
Add an LDAP Macro fields
Field Description
Variable Name Specifies the name of the variable.
Attribute Name Specifies the LDAP user attribute whose value will be
retrieved from the client’s LDAP/Active Directory user
record.
Prefix Specifies values at the start of the string that you want to
ignore, if the value string of the LDAP attribute is long and
you wish to extract only part of it. Combine with a suffix if
the value you want is in the middle of the string.
Suffix Specifies values at the end of the string that you want to
ignore, if the value string of the LDAP attribute is long and
you wish to extract only part of it. Combine with a prefix if
the value you want is in the middle of the string.