User Guide

Chapter 6 Configuring authentication 297
Nortel Secure Network Access Switch 4050 User Guide
4 Click Apply.
The new LDAP macro is automatically assigned a unique index number, and
appears in the LDAP Macro Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Reordering LDAP macros
To change the order of existing LDAP macro variables, perform the following
steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
ldap > LDAP Macros tab.
The LDAP Macros screen appears (see Figure 71 on page 295).
2 Select an LDAP macro entry from the LDAP Macro Table.
3 Use the up and down arrows to reposition the selected entry.
4 Click Apply on the toolbar to accept the new order, and adjust index numbers
for the LDAP macros accordingly. Click Commit on the toolbar to save the
changes permanently.
Removing LDAP macros
To remove existing LDAP macro variables, perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
ldap > LDAP Macros tab.
The LDAP Macros screen appears (see Figure 71 on page 295).
2 Select an LDAP macro entry from the LDAP Macro Table.
3 Click Delete.
A confirmation dialog appears.
4 Click Yes.
The LDAP macro is removed from the LDAP Macro Table.