User Guide

362 Chapter 8 Managing system users and groups
320818-A
—oper
—admin
— certadmin
By default, the admin user is a member of all groups above, and can therefore
assign a new or existing user to any of these groups. The group assignment of
a user dictates the user rights and access levels to the system.
5 Verify and apply the group assignment.
When you enter the
list command, the current and pending group
assignment of the user being edited is listed by index number and group name.
Because the cert_admin user is a new user, the current group assignment listed
by
Old: is empty.
6 Define a login password for the user.
When the user logs in to the Nortel SNAS 4050 cluster the first time, the user
will be prompted for the password you define in this step. When successfully
logged on, the user can change his or her own password. The login password
is case sensitive and can contain spaces.
>> User# edit cert_admin
>> User cert_admin# groups/add
Enter group name: certadmin
>> Groups# list
Old:
Pending:
1: certadmin
>> Groups# apply
Changes applied successfully.
>> Groups# /cfg/sys/user
>> User# edit cert_admin
>> User cert_admin# password
Enter admin's current password: (admin user password)
Enter new password for cert_admin: (cert_admin user password)
Re-enter to confirm: (reconfirm cert_admin user password)