User Guide

Chapter 8 Managing system users and groups 373
Nortel Secure Network Access Switch 4050 User Guide
3 Enter the user information in the applicable fields. Table 69 describes the Add
a User fields.
4 Click Apply.
The new user entry appears in the User Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing existing user accounts
To remove an existing user, perform the following steps:
1 Select the System > Manage Users > User Table tab.
The User Table appears (see Figure 96 on page 371).
2 Select a user entry to remove from the User Table.
3 Click Delete.
A dialog box appears to confirm the deletion of this user account.
4 Click Yes.
The entry is immediately removed from the User Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 69
Add a User fields
Field Description
Name The user name for the new user. The maximum length of
the user name is 255 characters. No spaces are allowed.