User Guide

Chapter 8 Managing system users and groups 381
Nortel Secure Network Access Switch 4050 User Guide
2 Enter the PassPhrase information in the applicable fields. Table 73 describes
the Set Certificate Export PassPhrase fields.
3 Click Set Pass Phrase.
4 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Managing user groups using the SREM
All users must belong to at least one group. Only an administrator user can add a
new user account to the system, but any user can grant an existing user
membership in a group to which the granting user belongs.
By default, the administrator user is a member of all three built-in groups (admin,
oper, certadmin) and can therefore add a new user to any of these groups.
However, a certificate administrator, who is a member of the certadmin group
only, can add an existing user to the certadmin group only.
If a user belongs to only one group and you want to change the user’s group
membership, add the user to the new group first, and then remove the user from
the old one.
Table 73
Set Certificate Export PassPhrase fields
Field Description
Enter New Pass Phrase Sets the pass phrase. Must be at least four characters.
Re-enter New Pass Phrase Confirms the pass phrase.