User Guide

Chapter 8 Managing system users and groups 383
Nortel Secure Network Access Switch 4050 User Guide
2 Click Add.
The Add a User Group dialog box appears (see Figure 103).
Figure 103
Add a User Group
3 Enter the User Group information in the applicable fields. Table 74 describes
the Add a User Group fields.
4 Click Add.
The new user group appears in the table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing a user group
To remove an existing user group from the User Group Table, perform the
following steps:
1 Select the System > Manage Users > user > User Groups tab.
The User Groups screen appears (see Figure 102 on page 382).
2 Select the group to remove from the User Group Table.
3 Click Delete.
A confirmation dialog appears.
4 Click Yes.
Table 74
Add a User Group fields
Field Description
Name Specifies the name of the group to which you are adding
the user. Options are oper, admin, certadmin.