User Guide
Chapter 2 Initial setup 63
Nortel Secure Network Access Switch 4050 User Guide
• To change the version on the existing NSNAS, download the desired
software image and upgrade the software on the existing cluster (see
“Upgrading the Nortel SNAS 4050” on page 757).
Joining a cluster
1 Log on using the following username and password:
login: admin
Password: admin
The Setup Menu displays.
2 Select the option to join an existing cluster.
3 Specify the management interface port number. This port will be assigned to
Interface 1.
Note: Nortel recommends always using the most recent software
version.
Alteon iSD NSNAS
Hardware platform: 4050
Software version: x.x
-------------------------------------------------------
[Setup Menu]
join - Join an existing cluster
new - Initialize host as a new installation
boot - Boot menu
info - Information menu
exit - Exit [global command, always available]
>> Setup#
>> Setup# join
Setup will guide you through the initial configuration.
Enter port number for the management interface [1-4]:
<port>