User Guide

Chapter 3 Managing the network access devices 77
Nortel Secure Network Access Switch 4050 User Guide
d To continue, go to step 7 on page 77.
7 Specify the VLAN ID of the Red VLAN, as configured on the network access
device. The network access devices in the domain can share a common Red
VLAN or can each have a separate Red VLAN.
8 Wait while the wizard completes processing to add the network access device,
then enter Apply to activate the changes. The system automatically assigns
the lowest available switch ID to the network access device.
The switch is disabled when it is first added to the configuration. Do not
enable the switch until you have completed configuring the system. For more
information, see “Configuring the network access devices using the CLI” on
page 80.
Do you want to add ssh key? (yes/no) [no]: yes
Paste the key, press Enter to create a new line,
and then type "..." (without the quotation marks)
to terminate.
> 47.80.18.98 ssh-dss
AAAAB3NzaC1kc3MAAABRAJfEJJvYic9yOrejtZ88prdWdRWBF8Qkm9iJ
z
3I6t6O1nzymt1Z1DVMXxCSb2InPcjq3o7WfPKa3VnUNUgTpESrFlH7oo
K
+Zys8iEUbmJ3kpAAAAFQCUE/74fr6ACaxJpMcz0TlWwahdzwAAAFEAgP
W
Vrk0VOOXQmfLhutwaTrxltIDkJzOEIXPfAIEpvDsvnlNkFE/i2vVdq/G
T
KmAghfN3BYjRIQT0PAwUKOS5gkyfLG9I5rKqJ/hFWJThR4YAAABQI9yJ
G
5Q7q+2Pnk+tx1Kd44nCD6/9j7L4RIkIEnrDbgsVxvMcsNdI+HLnN+vmB
R
5wd+vrW5Bq/ToMvPspwI+WbV8TjycWeC7nk/Tg++X53hc=
> ...
Red vlan id of Switch: <VLAN ID>
Creating Switch 1
Use apply to activate the new Switch.
>> Domain 1#