User Guide

92 Chapter 3 Managing the network access devices
320818-A
The Switches screen appears (see “Switch Configuration screen” on
page 116).
2 Click Add.
The Add a Switch dialog box appears (see Figure 6).
Figure 6
Add a Switch
3 Enter the network access device information in the applicable fields. Table 3
describes the Add a Switch fields.
Table 3
Add a Switch fields
Field Description
Index Specifies an integer that uniquely identifies the network
access device in the Nortel SNAS 4050 domain.
Name Specifies a string that identifies the switch on the Nortel
SNAS 4050.
The maximum length of the string is 255 characters. After
you have defined a name for the switch, you can use either
the switch name or the switch ID to access the network
access device.
Type Specifies the type of network access device. The options
are ERS8300 and ERS5500.
IP Address Specifies the network access device IP address.
Red VLAN ID Specifies the VLAN ID of the Red VLAN configured on the
network access device