User Guide

98 Chapter 3 Managing the network access devices
320818-A
Adding VLANs to a domain
To add VLANs to a domain, complete the following steps:
1 Select the Secure Access Domain > domain > VLANs tab.
The domain VLANs screen appears (see Figure 8 on page 97).
2 Click Add.
The Add a new VLAN dialog box appears (see Figure 6).
Figure 9
Add a new VLAN
3 Enter the VLAN information in the applicable fields. Table 5 describes the
Add a new VLAN fields.
4 Click Add.
The new VLAN appears in the VLAN Table.
5 Repeat this step for each Green and Yellow VLAN configured on the domain.
6 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 5
Add a new VLAN fields
Field Description
Name The name of the VLAN, as configured on the domain.
ID The ID of the VLAN, as configured on the domain.