Network Router User Manual

303532-A Rev 00
2-1
Chapter 2
Starting L2TP
The quickest way to start L2TP is to enable it with the default configuration that
Bay Networks software supplies. This configuration uses all available parameter
defaults. You need to supply values for several parameters that do not have default
values.
This chapter includes the following information:
Topic Page
Planning Considerations for an L2TP Network
2-2
Preparing a Configuration File 2-3
Enabling L2TP on an Unconfigured WAN Interface 2-4
Enabling L2TP on an Existing PPP Interface 2-5
Enabling L2TP on an Existing Frame Relay Interface 2-7
Enabling L2TP on an Existing ATM Interface 2-9