Network Router User Manual

Configuring L2TP Services
2-6
303532-A Rev 00
9. Set the following parameters:
• L2TP IP Interface Address
• Subnet Mask
Click on
Help
or see the parameter
descriptions beginning on page A-11
.
Site Manager displays a message
alerting you of the time delay to create
the L2TP tunnel circuits.
10. Click on
OK
. You return to the L2TP IP Interface List
window, which displays the IP interface
address and the subnet mask. A
message window opens that reads,
L2TP
Configuration is completed
.
11. Click on
OK
.
12. Click on
Done
. You return to the Circuit Definition
window.
13. Choose
File
. The File menu opens.
14. Choose
Exit
. You return to the Configuration Manager
window.
Site Manager Procedure
(continued)
You do this System responds