Network Router User Manual

Customizing L2TP Services

303532-A Rev 00

3-9

Modifying L2TP IP Interface Addresses

The L2TP IP Interface List window lists the L2TP IP interface addresses for each

slot that has L2TP configured. The LNS uses the addresses internally to identify

the remote sites.

For more information about the L2TP IP interface, see “L2TP IP Interface

Addresses” on page 1-16.

To change an address on the list, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

L2TP

. The L2TP menu opens.

4. Choose

L2TP IP Interface

. The L2TP IP Interface List window opens.

5. Select an LNS entry from the list.

6. Click on

Change

. The L2TP IP Interface window opens.

7. Modify the following parameters:

• L2TP IP Interface Address

• Subnet Mask

Click on

Help

or see the

parameter

descriptions beginning on page A-11

8. Click on

. You return to the L2TP IP Interface List

window. The new address appears in the

list.

9. Click on

Done

. You return to the Configuration Manager

window.