Network Router User Manual

Customizing L2TP Services
303532-A Rev 00
3-11
Deleting L2TP from a PPP Interface
To delete L2TP from a PPP interface, complete the following tasks:
6. Set the
Enable L2TP
parameter to
Disable
. Click on
Help
or see the
parameter description on page A-3
.
Site Manager disables L2TP for the slot.
7. Click on
Done
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on a WAN connector configured with
L2TP.
The Edit Connector window opens.
2. Choose
Edit Circuit
. The Circuit Definition window opens.
3. Choose
Protocols
. The Protocols menu opens.
4. Choose
Add/Delete
. The Select Protocols window opens.
5. Click on
L2TP
. Site Manager deselects L2TP.
6. Click on
OK
. You return to the Circuit Definition
window.
7. Choose
File
. The File menu opens.
8. Choose
Exit
. You return to the Configuration Manager
window.
Site Manager Procedure
(continued)
You do this System responds