Network Router User Manual

L2TP Parameters
303532-A Rev 00
A-11
The parameter descriptions follow.
Parameter: L2TP IP Interface Address
Path: Configuration Manager > Protocols > IP > L2TP > L2TP IP Interface
Default: None
Options: Any unique IP address
Function: Specifies the IP address that identifies the L2TP IP interface for the LNS. You
must provide an address for each slot configured as an LNS.
Instructions: Enter a unique IP address. This address applies for the entire router slot.
MIB Object ID: Not Applicable
Parameter: Subnet Mask
Path: Configuration Manager > Protocols > IP > L2TP > L2TP IP Interface
Default: None
Options: A 32-bit IP subnet mask
Function: Specifies the network and subnet portion of the L2TP IP interface address.
Site Manager automatically calculates a natural subnet mask based on the class
of the network address. For example, if you enter a Class C address, the subnet
mask will be 255.255.255.0.
To configure more subnets for your network, you can change this natural mask.
Instructions: Accept the assigned natural subnet mask or enter a new one. You are not
restricted to entering a natural mask. For example, if the L2TP IP address is
192.32.16.55, you can enter a subnet mask of 255.255.255.192.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.6