Network Router User Manual

Configuring L2TP Services
A-12
303532-A Rev 00
Parameter: RIP Enable
Path: Configuration Manager > Protocols > IP > L2TP > L2TP IP Interface
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether RIP Listen is enabled on this interface. See Configuring IP
Services for more information about RIP.
Instructions: Accept the default, Enable, so that the LNS can learn routes from a remote
dial-in router. Select Disable to disable RIP.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.2