Network Router User Manual

303532-A Rev 00
B-1
Appendix B
Configuration Examples
This appendix provides two examples of L2TP network configurations. It includes
only those parameters that require changes from their default settings for proper
configuration. For instructions on modifying parameters, see Chapter 3,
“Customizing L2TP Services.”
This appendix assumes that you are familiar with L2TP configuration procedures.
For information about setting up an interface on the router, see Quick-Starting
Routers and Configuring and Managing Routers with Site Manager.
Example 1: Remote PC Calling the Corporate Network
Figure B-1 shows a sample L2TP network. In this network, note the following:
• Domain names are in the TMS database.
• User names and domain names are in the RADIUS server database.
• Tunnel IP interface addresses are unique for each slot.
• Frame relay is the WAN protocol for the connection between the ISP network
and the corporate network.