Network Router User Manual

Configuration Examples
303532-A Rev 00
B-3
Configuring the LACs and the TMS
The LACs in this network are Model 5399 Remote Access Concentrators. Both
devices have L2TP modules installed. See Model 5399 Remote Access
Concentrator documentation for information about configuring L2TP.
The LACs use the same TMS, which you configure with the following
information:
Domain name: baynetworks.com
Tunnel end point address (LNS address): 192.32.16.55
Tunnel authentication password: LAC1
Configuring the LNS
The LNS in this network is a BN router with at least two synchronous interfaces.
To configure the router as an LNS:
1.
Choose a WAN port for the slot you want as the LNS.
2.
From the WAN Protocols menu, choose Frame Relay.
3.
From the Select Protocols menu, choose IP and L2TP.
4.
In the IP Configuration window, enter the IP address of the LNS.
5.
In the L2TP Configuration window, enter the RADIUS server
information.
Parameter Name Value
IP Address 192.32.16.55
Parameter Name Value
RADIUS Primary Server IP Address 192.32.26.6
RADIUS Primary Server Password bay_private
RADIUS Client IP Address 192.32.16.55