Terminal Server User Guide

SHOW|LIST PORT
893-386-B 3-49
Current Groups The names of the LAT service groups where you have chosen to have access. This list
may be the same or a subset of the authorized group list.
Enabled The characteristics either you or the network manager have enabled with
Characteristics the DEFINE|SET PORT commands. The characteristics that can appear
in this field include the following:
Characteristic Means
Autobaud The port determines the input port speed, parity, and character
size for the device connected to it, and automatically sets the
appropriate port characteristics.
Autoconnect The port automatically connects to a dedicated service or a
preferred service when the user logs on to the port, or the port
attempts to reconnect a session when a connection failure
occurs.
Autodedicated The terminal server automatically logs on the port and
establishes a session between the port and a dedicated service
when the terminal server is initialized or the port is logged
out.
Autoprompt The terminal server automatically prompts the LAT service
node to run its logon routine when the port makes a
connection to that node.
Broadcast The port can receive messages that are broadcast from other
ports on the terminal server.
Connectresume The CONNECT command resumes an existing session rather
than establishing a new session when you enter the command
with a destination name where you already have a session
established.
Dial back The dial-back feature is enabled at this port. This feature limits
remote to the terminal server to a specific list of users and
phone numbers.
Dial up The port is connected to a dial-up line.