Terminal Server User Guide

SHOW|LIST SERVICES
3-66 893-386-B
SHOW|LIST SERVICES
Display a list of LAT services on the network
The SHOW SERVICES command displays a list of available LAT services on the
network, and information about each service. The LIST SERVICES command displays
a list of services in the permanent database.
Notes
These commands display only those LAT services that are available to you on the
network.
Some ports may not accept commands such as SHOW SERVICES that display
network resources. Check with the network manager if you have questions about
availability of display commands at your port.
Syntax
SHOW SERVICES [ service-name ] [CHARACTERISTICS]
[STATUS]
[SUMMARY]
[LOCAL] [CHARACTERISTICS]
[STATUS]
[SUMMARY]
[ALL] [CHARACTERISTICS]
[STATUS]
[SUMMARY]
LIST SERVICES [ service-name ] [CHARACTERISTICS]
[LOCAL] [CHARACTERISTICS]
Abbreviation
SH SERV
LIS
Where Means
service-name Display information about one or more services that you specify in this variable. If
you do not specify a service name, the terminal server displays all services available at
this port.
You can use the asterisk character (*) as a template to select a subset of names with
this command. For example, if you entered SHOW SERVICES AB*, the system
would display all available names that began with AB. If you entered SHOW
SERVICES A*BC, the system would display names that began with A and ended with
BC.
ALL Display a list of all services available at this port. This is the default display for this
command.