Computer Telephony Adapter Installation Guide

Preparing for installation 7
Computer Telephony Adapter 150 Installation Guide
Norstar KSU requirements
This section describes the components needed for the installation of the
TAPI SP on Norstar Key Systems. Included are the necessary software
releases, line cards, telephones, and interface devices supported. Required
cabling is also listed.
Software releases
Table 2 lists the Key Systems supported by the Norstar TAPI SP. The CPC
represents the product number on the software cartridge, and the Software
code is the one that is displayed on your telephone when you perform a
query. It is recommended that this or a higher version be used. A lower
version may work but should be updated at the first sign of trouble. Check
the README.TXT file that accompanies the Norstar TAPI SP for updates
to this list.
Table 2 Key Systems supported by the Norstar TAPI SP
Norstar KSU Hardware Cartridge Names
Compact 3x8
DR5
Compact 6x16 DR5
Modular 8x24 DR5
Modular ICS (MICS) CDA-MICS-XC-1.0
CDA-MICS-XC-1.1
CDA-MICS-XC-2.0
NA-MICS-DR-1.0
NA-MICS-DR-1.1
NA-MICS-DR-2.0
USA-MICS-XC-1.0
USA-MICS-XC-1.1
USA-MICS-XC-2.0
USA-MICS-XL-1.0
Compact ICS (CICS) NA-CICS-DR-1.0
NA-CICS-DR-2.0