Nortel Knowledge Network Meridian Digital Telephones M2006 M2008/M2008HF M2616 User Guide Enterprise Solutions Documentation
While you are away from your desk: Call Forward 38
Contents Contents Introducing your Meridian Digital Telephone 1 Meridian Digital Telephones ................................................................... 1 M2616 ................................................................................................. 1 M2008/M2008HF ................................................................................ 2 M2006 .................................................................................................
Contents Override, Enhanced ............................................................................. 20 Stored Number .................................................................................... 21 Buzz ................................................................................................... 21 Forced Camp-on .................................................................................. 22 Call Charge/Forced Charge .................................................................
Contents To talk with more than one person 45 Conference ......................................................................................... 45 Selectable Conferee Display and Disconnect .......................................... 46 Group Call .......................................................................................... 47 Call Join ............................................................................................. 48 Privacy Release ..........................................
Contents iv
Introducing your Meridian Digital Telephone Introducing your Meridian Digital Telephone This guide introduces you to your new Meridian Digital Telephone. It provides you with a description of the controls, and a description of the features that are available to you.
Introducing your Meridian Digital Telephone M2008/M2008HF Handsfree (on the M2008HF only) On-Hook Dialing Message Waiting Indicator Wall Mount Capability 8 configurable Feature Keys (7 on the M2008HF) Volume Control Bar for: • • • • • Ringing Tone Buzz Tone Speaker Handset/Headset Handsfree (M2008HF) Support for the following set options: • • • • 2 2 x 24 Character Display MCA data option to provide integrated voice and data transmission External Alerter Interface for high ambient noise environments An
Introducing your Meridian Digital Telephone M2006 On-Hook Dialing Message Waiting Indicator Wall Mount Capability 6 configurable Feature Keys Volume Control Bar for: • • • • Ringing Tone Buzz Tone Speaker Handset/Headset Support for the following set options: • • • MCA data option to provide integrated voice and data transmission External Alerter Interface for high ambient noise environments Analog Terminal Adapter (ATA) for simultaneous use of a fax, modem or other analog device through the ATA’s RJ-11
Introducing your Meridian Digital Telephone Selecting a position for your Meridian Digital Telephone • On Your Desk: Your Meridian Digital Telephone can be placed on your desk so that it is tilted upwards making it easier to see the display. • On the wall: The wall mount lets you attach your telephone on the wall by rotating the base. All three Meridian Digital Telephone models can be wall mounted.
Introducing your Meridian Digital Telephone Parts of your Meridian Digital Telephone Message Waiting Light The Message Waiting light turns on to indicate that a message has been left for you. LCD Indicator A steady º means the feature or line is active. A flashing º means the line is on hold or the feature is being programmed. Meridian Display Option The Meridian Display Option, with adjustable angle and contrast, shows you features, instructions, and incoming call information.
Your telephone’s display Your telephone’s display Idle screen format The Meridian M2616 and M2008/M2008HF can be equipped with a 2 x 24 character display module. The idle display, as shown below, gives the current date and time. 24 APR 7:45 P When you go off hook, the time and date disappear and information about your call is displayed. Calling party information When your phone rings, information about the incoming call is displayed.
Your telephone’s display Using Display Options Volume Adjustment P It is easy to adjust the volume on your telephone by following these steps: 1. Press the Program Key. 2. Press ‚ then ‚. Follow by pressing ⁄ to adjust the ringing tone. Pressing ¤ allows you to adjust the buzzer tone. Press ‹ to adjust the speaker volume. Press › to adjust the volume of the handset and press fi “handsfree” (if it is configured.) ® P Predial recall P 3.
Your telephone’s display ® P Call Timer Enable P 3. Use the Volume Control Bar to increase or decrease the contrast . 4. Press the Program Key. Sometimes it is interesting to see how long we stay on the phone with certain customers or fellow employees. Follow these steps to enable the call timer. 1. Press the Program Key. 2. Press ® P Idle Screen Format P ‚ then ‹. 3. Press the Volume Control Bar to toggle between CALL TIMER ON and CALL TIMER OFF. 4.
Your telephone’s display Language Selection P The information on your display can be displayed in one of several languages. Follow these steps to change your display to a different language: 1. Press the Program Key. 2. Press ‚ then fi. ® P Display Diagnostics P 3. Use the Volume Control Bar to scroll to a the desired language. 4. Press the Program Key. Select Display Diagnostics by following these steps: 1. Press the Program Key. 2. Press ‚ then ‡. ® P 3.
Your telephone’s features Your telephone’s features Your telephone system administrator assigns features to your programmable feature keys. Whenever this guide describes a procedure that requires special codes or passwords, ask your telephone system administrator to provide these to you. To use a feature, you will be instructed to press a feature key, or enter an FFC code. You may be provided with Flexible Feature Codes (FFCs), which you will need in order to use some features.
Your telephone’s features Answering Calls When you receive an incoming call, your telephone rings and the LCD indicator º flashes. To answer a call, perform one of the following • Lift the handset © • Press the Handset Mute Key (Main DN only) ∫ 2637 • Press the DN Key beside the flashing LCD indicator º. Placing a call on hold Use the Hold feature to place a call on hold.
Your telephone’s features Call Transfer Use the Transfer feature to redirect a call to a third party. To transfer a call to another number: † 1. Press Transfer. The other party is on hold and you hear dial tone. The LCD indicator lights steadily. º 2. Dial the DN that you want to transfer the call to. † 3. Press Transfer again, either when you hear ringing, or after you talk privately to the person you are transferring the call to. The LCD indicator goes from steady to off.
Your telephone’s features On-hook dialing On-hook dialing allows you to dial a number without lifting the handset. To use On-hook dialing: ∫ 2637 1. Press a DN Key. 2. Upon hearing dial tone, Dial the number. 3. Lift the handset when the called party answers or, if using handsfree, begin talking. If the number you are calling is busy: ® or ¶ Press Release to release the line, or Ring Again if desired.
Your telephone’s features Last Number Redial Last Number Redial allows you to automatically redial the last number you dialed. To use Last Number Redial: √or ∫ 2637 • Lift the handset. • Press Last Number Key or your Primary DN Key. or for Handsfree operation: ∫ 2637 ∫ 2637 • Press your Primary DN Key twice. © ∫ 2637 • Press the Handsfree Mute Key followed by your Primary DN Key • Lift the handset or press a DN Key. • Press the Pound Sign Key twice.
Your telephone’s features To mute a handsfree call: © 1. Press the Handsfree Mute Key. The LCD indicator º flashes. © 2. Press the Handsfree Mute Key again to return to a two-way conversation. To switch from the handset to Handsfree: © 1. Press the Handsfree Mute Key. 2. Replace the handset. Group Listening The group listening feature allows you to listen to a call through the speaker while speaking through the handset, thus allowing a third party(ies) to listen to both sides of the conversation.
Making a call: Auto Dial - Ring Again Making a call This chapter describes features that you can use when making a call. Auto Dial Auto Dial lets you dial a specific telephone number by pressing a feature key. To store an Auto Dial number: ç 1. Without lifting the handset, press Auto Dial. The associated LCD Indicator flashes º. 2. Dial the number. ç 3. Press Auto Dial again. To use Auto Dial: 1. Lift the handset or press a DN Key. ç 2. Press Auto Dial. The stored number is dialed automatically.
Making a call: Ring Again - Speed Call 2. Replace the handset or press Release. When the number you want to reach is free, or the person has re-used his set, you hear the Ring Again signal. 3. Lift the handset or press a DN Key. ¶ 4. Press Ring Again to automatically redial the number. To cancel Ring Again: ¶ Press Ring Again. Speed Call Speed Call allows you to dial frequently-called telephone numbers using a brief code to represent the number. The codes are one, two, or three digits long (i.e.
Making a call: Speed Call - Speed Call on Private Lines 3. Dial the new access code (if required), internal, external, or long-distance telephone number. • 4. Press Speed Call again. To delete a Speed Call number: • 1. Press Speed Call. 2. Dial the Speed Call code that you want to delete. • • 3. Press Star. 4. Press Speed Call again. To make a Speed Call: 1. Lift the handset or press a DN Key. • 2. Press Speed Call. 3. Dial the Speed Call code.
Making a call: System Speed Call - Call Page System Speed Call System Speed Call lets you dial Speed Call codes and override all restrictions on the telephone during the call. See Speed Call for more information on setting up speed call codes. To make a System Speed Call: 1. Lift the handset or press a DN Key. – 2. Press Sys Speed Call. 3. Dial the Speed Call code of the number you want to dial.
Making a call: Override - Override, Enhanced Override You can override a busy signal and interrupt another call. This feature is called Busy Override on the MSL-100. To override a busy/engaged signal: 1. You dial a telephone number and hear busy signal. £ 2. Press Override. The people on the call in progress hear a tone for approximately one second; the three of you are then connected together. A short tone repeats every 16 seconds.
Making a call: Stored Number - Buzz Stored Number The Stored Number feature allows you to store a single telephone number that you can dial quickly. You can easily change the stored number. To store a number when you're not on a call: º 1. Without lifting the handset, press Stored No. 2. Dial the number. º 3. Press Stored No again. Any number previously stored is replaced. To store a number when you're on a call: º After you dial the number, press Stored No. To display the stored number: œ 1.
Making a call: Forced Camp-on - Call Charge/Forced Charge Forced Camp-on Forced Camp-on allows your telephone to automatically ring another telephone as soon as it disconnects from its current call. Forced Camp-on allows both internal and external calls to be camped on; Camp-on allows only external calls to be camped on. To use Forced Camp-on: 1. Dial a telephone number and hear a busy signal. £ 2. Press Override to initiate a Forced Camp-on.
Making a call: Call Charge/Forced Charge To charge a call in progress: † or ø µ or 1. Press Transfer or Conference. 2. Press Charge, or enter the Call Detail Recording FFC, or enter the SPRE code followed by fi. 3. Dial the charge account number. ∫ 2637 4. Press the DN Key to return to your call. To charge a call to an account when you transfer a call: † µ or 1. Press Transfer. The call is on hold. 2. Press Charge, or enter the Call Detail Recording FFC, or enter the SPRE code followed by fi. 3.
Making a call: Hot Line - Radio Paging 4. Dial the party you want to add to the conference. ø 5. Press Conference. Hot Line The system administrator can program a Hot Line telephone number that is dialed automatically. To use Hot Line: ¥ Press Hot Line. The Hot Line number is dialed automatically. or If your main DN is a Hot Line, Lift the handset. The Hot Line number is dialed automatically. Radio Paging Your Meridian 1 system may be equipped with an on-site Radio Paging system.
Making a call: Radio Paging While ringback is heard, the person you have paged may proceed to any DN and enter a Radio Paging Answer code plus their own DN to be connected directly to you. If your call is not answered within a preset time period you will hear a continuous high pitched tone for fifteen seconds, then silence. Replace the handset or press Release and try again later. Automatic Post - selection The called party is either busy on the telephone or away from the desk.
Making a call: Radio Paging - Voice Call be connected to the person who has paged you. 1. Lift the handset or press a DN Key on any telephone on the system (as long as it is not a hotline, private line, or a manual line telephone). You hear dial tone. 2. Dial the Radio Paging Answer FFC. You hear paging tone. 3. Dial your own DN. You are connected to the paging caller. If the paging caller has hung up you will hear a steady high pitched tone (Number Unavailable tone).
Receiving a call: Call Waiting Receiving a call This chapter describes features that you can use when receiving a call. Call Waiting If the attendant routes an outside call to you when you are already on a call, Call Waiting lets you put your current call on hold, allowing you to answer the outside call. Note: If your system is equipped with the Autohold feature, use of the hold key is not required. To answer an incoming call during a telephone call: ˙ 1.
Receiving a call: Call Pickup (for Meridian 1) Call Pickup (for Meridian 1) Using Call Pickup, you can answer a ringing telephone from any telephone in your Pickup Group or another Pickup Group. To answer a ringing call in your own Call Pickup group: 1. Lift the handset or press a DN Key. ƒ or 2. Press Call Pickup, or enter your SPRE code followed by ‹, or enter the Call Pick Up FFC. To answer a ringing call in another Call Pickup group: 1. Lift the handset or press a DN Key. ‘ or 2.
Receiving a call: Call Pickup (for Meridian SL-100) Call Pickup (for Meridian SL-100) Using Call Pickup, you can answer a ringing telephone from any telephone in your Pickup Group or another Pickup Group. To answer a ringing call in your own Call Pickup Group: and 1. Lift the handset and press a DN Key. ∫ 2637 ƒ or 2. Press Call Pickup, or enter your Call Pickup feature access code. To answer a ringing call in another Call Pickup Group: and 1. Lift the handset and press a DN Key. ∫ 2637 ƒor 2.
Receiving a call: Timed Recall Reminder - Automatic Answerback Timed Recall Reminder Timed Reminder Recall rings your telephone after a period of time to remind you of a transferred call that has not yet been answered. To use the Timed Reminder Recall: † 1. Press Transfer. The call is placed on hold and you hear dial tone. 2. Dial the number to which you want to transfer the call. † 3. When you hear ringback tone, press Transfer again. If the transferred call is not answered, your telephone rings.
During a call: Call Transfer - Timed Reminder Recall During a call This chapter describes features that you can use during your call. Call Transfer Call Transfer allows you to transfer a call to another number. To transfer a call while on a call: † 1. Press Transfer. The call is placed on hold and you hear dial tone. 2. Dial the number to which you want to transfer the call. † 3.
During a call: Timed Reminder Recall - Auto Dial Transfer † 3. Press Transfer again or replace the handset before the extension answers. This starts the recall timer Note: If the person to whom the call is transferred answers, the recall timer stops. If the transferred call is not answered, your telephone rings: 1. Lift the handset or press a DN Key. You are connected to the original caller. The extension to which you transferred the call will continue to ring. † 2.
During a call: Call Park Call Park Call Park allows a call to be held temporarily, then to be retrieved from any other DN. You can park an incoming call and then page the called party, without tying up a line. Your office may have a System Park DN where most calls are automatically parked. If configured networkwide, Call Park can be used across networks. To park a call on the System Park Extension or your own DN: ¢ ¢ Press Park twice. If there is a System Park DN, the call is parked on it.
During a call: Call Park - Attendant Recall - Display/Inspect To retrieve a parked call: 1. Lift the handset or press a DN Key. ¢ 2. Press Park, or enter the SPRE code followed by ‡¤, ‡¤ or enter the Call Park FFC. 3. Dial the DN where the call is parked. If you park a call and it isn’t answered within a specified period of time, it rings back to your telephone or to the attendant. Check with your system administrator to determine your specified period of time.
During a call: Call Charge - On Hold on Loudspeaker 3. Press the DN Key beside the flashing LCD indicator º. Information about the call is displayed in the Display Module. Displaying the second caller's name does not interfere with the current call in progress. You can also press the Display Key followed by the Forward Key or an Auto Dial Key to view the number stored on the key.
During a call: On Hold on Loudspeaker To talk privately to the party on the Loudspeaker: Use the handset on the Loudspeaker (if provided). While the Loudspeaker is active, any other call is maintained on the handset. More than one call can be put on hold, but only one call at a time can be placed on the Loudspeaker. To use On Hold On Loudspeaker on the Speech Monitor: ∫Hot Line 1. Make a call from Hot DN or the DN of the Speech Monitor. ˙ 2. Place the call on Hold.
During a call: Malicious Call Trace - Centrex Switchhook Flash Malicious Call Trace Malicious Call Trace provides a way for you to trace nuisance calls within your system. While you are on a call: ≠ Press Trace. If you do not have a trace button: † or ø 1. Press Transfer or Conference. 2. Dial the Trace FFC, or SPRE code followed by °‹. ∫ 2637 3. Press the DN Key beside the flashing LCD indicator to return to the call.
While you are away from your desk: Call Forward While you are away from your desk This chapter describes features that you may wish to use when you are away from your desk. Call Forward Call Forward allows you to transfer all your calls so that they ring at another DN. You cannot forward calls while your telephone is ringing. To forward all your calls: ∑ 1. Press Forward. The LCD indicator º flashes. 2. Dial the DN that you want to forward your calls to. ∑ 3. Press Forward.
While you are away from your desk: Call Forward - Internal Call Forward - Internal Call Forward—Internal allows only calls originating at internal DNs to ring at another DN. Calls originating outside your Meridian 1 system will still ring at your telephone. You cannot forward calls while your telephone is ringing. To forward your internal calls: ∫Int Forward 1. Press Internal Call Forward. The LCD indicator º flashes. 2. Dial the DN that you want to forward your calls to. ∫Int Forward 3.
While you are away from your desk: Remote Call Forward Remote Call Forward Remote Call Forward allows you (from any telephone other than your own) to forward your calls to any telephone. To activate Remote Call Forward: 1. Lift the handset or press a DN Key. 2. If you are calling from a telephone outside the system, first Dial the Direct Inward System Access (DISA) number and wait for the dial tone. 3. Dial the Remote Call Forward Activate FFC. 4. Dial your Electronic Lock password .
While you are away from your desk: Remote Call Forward 3. Enter the Remote Call Forward Deactivate FFC. 4. Dial your Electronic Lock password. (See “Electronic Lock” on page 42.) 5. Dial your DN. £ 6. Press the Pound Sign Key. To verify Remote Call Forward: 1. Lift the handset or press a DN Key. 2. If you are calling from a telephone outside the system, first Dial the Direct Inward System Access (DISA) number and wait for the dial tone. 3. Enter the Remote Call Forward Verify FFC. 4.
Away from your desk: Call Forward Deactivation - Electronic Lock Call Forward Destination Deactivation Call Forward Destination Deactivation allows you to deactivate the Call Forward All Calls feature on a telephone which has been forwarded to your telephone. To lock your telephone: 1. Lift the handset or press a DN Key. 2. Dial the Call Forward Destination Deactivation FFC. 3. Dial the DN of the telephone for which you wish to deactivate Call Forward All Calls. £ 4. Press the Pound Sign key.
While you are away from your desk: Electronic Lock To unlock your telephone: 1. Lift the handset or press a DN Key. 2. Dial the Unlock FFC. 3. Dial your electronic lock password. 4. If you are using someone else’s telephone, Dial your DN. 5. Replace the handset or press Release. To change your electronic lock password: 1. Lift the handset or press a DN Key. 2. Dial the Electronic Lock Password Change FFC. 3. Dial the current password for your telephone. 4. Dial the new password you wish to use. 5.
While you are away from your desk: Intercom Intercom You can use the Intercom feature to call a member of your intercom group. To make an Intercom call: 1. Lift the handset or press a DN Key. Ω 2. Press Intercom. 3. Dial the one- or two-digit code for the intercom group member you wish to call. To answer an intercom call when you are on a line other than your intercom group line: ˙ or ® Ω 44 1. Press Hold to put the current call on hold, or press Release to terminate the call. 2.
To talk with more than one person: Conference To talk with more than one person This chapter describes features which allow you to talk with more than one person at the same time. Conference You can set up a conference call for up to three (or six) people, including yourself. Contact your telephone system administrator to find out the maximum number of persons you can join in a conference call on your system. To set up a conference call: ø 1. While on a call, press Conference.
To talk with more than one person: Conferee Display & Disconnect Selectable Conferee Display and Disconnect You can view the list of active conferees by using the Conferee Selectable Display key and disconnect any party that has been added to the conference call. This feature is not available on the MSL-100. To view active conferees: ∫Conf Display 1. While on a conference call, press the Conferee Selectable Display key. The LCD indicator º turns on.
To talk with more than one person: Group Call Group Call Group Call automatically calls members of a predefined group, one at a time, until they have all answered. Ask your system administrator for details on creating a conference call group. To call group members: 1. Lift the handset or press a DN Key. ≈ 2. Press Group Call or enter the Group Call FFC. The group members are called automatically. The LCD indicator º beside the Group Call Key flashes until all members have answered.
To talk with more than one person: Call Join - Privacy Release If you are on a conference call or a group call when another group call comes in, you are not notified of the second call. To end a Group Call: Replace the handset or press Release. When the person who made the group call disconnects, all the members of the group are disconnected from the call. However, the other members can disconnect at any time during the call without affecting the call.
Working without interruption: Call Forward Working without interruption This chapter describes features that allow you to avoid receiving calls. Call Forward Call Forward allows you to transfer all your calls so that they ring at another DN. You cannot forward calls while your telephone is ringing. To forward all your calls: ∑ 1. Press Forward. The LCD indicator º flashes. 2. Dial the DN that you want to forward your calls to. ∑ 3. Press Forward. The LCD indicator º remains on.
Working without interruption: Make Busy Make Busy Make Busy allows you to make your telephone appear busy to all callers. To make your telephone appear busy: ¡ Press Make Busy. To receive calls again: ¡ 50 Press Make Busy again.
Hospitality features: Automatic Wake-Up on Your Own Telephone Hospitality features These hospitality features are intended primarily for hotel operations use. Automatic Wake-Up on Your Own Telephone Although normally used as a hotel feature, Automatic Wake-up may be useful to business users who require a timed reminder call feature. From your telephone you may program the Meridian 1 system to automatically place a call to you at a predetermined time.
Hospitality features: Automatic Wake-Up - Message Registration 2. Dial the Wake-Up Verify FFC. 3. Dial the wake-up time in a 24 hour format (hh mm). If it is correct, you hear a confirmation tone. Note: In 24-hour format, 7:30 AM is entered as 0730; 9:45 PM is 2145. 4. Replace the handset or press Release. Message Registration If your telephone is equipped with a display, you can read, change, or reset meters that log hotel telephone calls. To read meters: ™ 1. Press Message Registration. 2.
Hospitality features: Maid Identification 2. Dial the room DN number. • ™ 3. Press Star. Press Message Registration. Maid Identification Maid ID makes it easier to keep track of which maids clean which rooms. The maid enters the information from the telephone in each room. To enter cleaning status: 1. Lift the handset or press a DN Key. 2. Dial the Maid ID FFC. 3.
Hospitality features: Room Status 7. Replace the handset or press Release. Room Status Room Status lets you read the status of a room using the Display Module. To read the status of a room: ª 1. Press Status. 2. Dial the DN for the room. The DN is displayed followed by a two-digit code.
Hospitality features: Room Status To change the status of a room: ª 1. Press Status. 2. Dial the DN for the room. The DN is displayed followed by a two-digit code. The first digit indicates the occupancy status: 0 = room vacant 1 = room occupied The next digit indicates the cleaning status of the room: 1 = cleaning requested 2 = cleaning in progress 3 = room cleaned 4 = room passed inspection 5 = room failed inspection 6 = cleaning skipped 7 = not for sale 3.
Hospitality features: Automatic Wake-Up for a Guest Automatic Wake-Up for a Guest (Option 11C Compact) From your telephone you may program the Meridian 1 Option 11C Compact telephone system to automatically place a call to your guest at a predetermined time. When the guest answers the call, they will hear recorded music for up to thirty seconds followed by a prerecorded announcement, or the attendant. To enter the time for a wake-up call: ∫Wake-Up 1. Press the Wake-Up key. 2.
Hospitality features: Controlled Class Of Service 4. Look at the display to verify the wake-up time programmed. ® 5. Press the Release key. Note: In 24-hour format, 7:30 AM is entered as 0730; 9:45 PM is 2145. Controlled Class Of Service (Option 11C Compact) With the Controlled Class Of Service (COS) feature, you may program the Meridian 1 Option 11C Compact telephone system to restrict specific room extensions from making long distance extensions.
Options Options Optional items are available for use with your Meridian Digital Telephone. Please contact your System Administrator for further details. Key Expansion Module The Key Expansion Module provides 22 additional feature keys for the M2616. You can add up to two Key Expansion modules, for a total of 62 feature keys. External Alerter Interface The External Alerter Interface lets you connect a remote ringer to your telephone. It can be used with all three models.
Your Telephone’s Controls Your Telephone’s Controls Volume bar Use ® to control the volume of the handset, the speaker, and the ringer. Raise the volume by pressing the right side of the bar. Lower it by pressing the left side. Microphone A microphone is integrated into the M2616 and M2008HF telephones, allowing you to have a telephone conversation without using the handset (known as Handsfree calling). Release You can terminate an active call by pressing ®, or by hanging up the handset.
Terms you should know Terms you should know Attendant — the attendant is a telephone operator in your organization. Directory Number (DN) — a DN is any extension on a telephone. Flexible Feature Codes (FFCs) - your system may use FFCs to access some of your telephone’s features. For your convenience, the FFCs for your system can be printed on a page located at the back of this guide. Meridian 1 — the Meridian 1 PBX is an office communications system.
Special Prefix Code (SPRE) and Flexible Feature Codes (FFCs) Special Prefix Code (SPRE) Special Prefix Code (SPRE) Flexible Feature Codes (FFCs) Radio Paging Trace Radio Paging Access Group Call Radio Paging Answer Call Pick Up Call Park DN Pick Up Maid ID Group Pick Up Wake-Up Request Remote Call Forward Activate Wake-Up Verify Remote Call Forward Verify Wake-Up Cancel Remote Call Forward Deactivate Electronic Lock Password Change Call Forward Destination Deactivation Lock Call Detail
Index Index Index A Attendant 60 Attendant Recall Auto Dial 34 16 Auto Dial Transfer 34 Automatic Answerback 30 Automatic Wake-up for a Guest 56 Automatic Wake-Up on Your Own Telephone 51 B Buzz 21 C Call Charge 35 Call Forward 38, 49 Call Forward, Internal 39 Call Join 48 Call Page 19 Call Park 33 Call Pickup 30 Call timer Enable 8 Call Transfer 12, 31 Call Waiting 30 Camp-on, Forced 22 Conference 45 Contrast Adjustment 7 Controlled Class Of Service (Option 11C Compact) 57 62
Index Index Controls, telephone 6, 59 D Dial Tone interrupted special 60 60 Direct Inward System Access 40, 41 Directory Number 60 Display 16, 21, 35, 38, 39, 49 Display Diagnostics 9 DN 60 E Enhanced Override 20 External Alerter Interface 58 F Feature keys 59 Features, telephone 10 Flexible Feature Codes (FFCs) 61 Forced Camp-on 22 G Group Call 47 Group Listening 15 H Handset 59 Handsfree HOLD 14 59 63
Index Index Hold 11, 27 Hot Line 24 I Idle Screen Format Intercom 8 44 Internal Call Forward 39 Interrupted dial tone 60 K Key Click 9 Key Expansion Module 58 L Language Selection 9 Last Number Redial 14 LCD indicator 59 M Main extension key 59 Make Busy 50 Making Calls 10 Malicious Call Trace 35 Meridian 1 60 Meridian Communications Adapter 58 Meridian SL-100 (MSL-100) Message Registration 52 Message Waiting light 59 Microphone 59 64 60
Index Index O On Hold on Loudspeaker 35 On-hook dialing 13 Options 58 Override 20 Override, Enhanced 20 P Paging tone 60 Predial Recall 7, 13 Primary Directory Number (DN) key Privacy Release Private Line 60 48 60 R Radio Paging Release 24 14 Remote Call Forward 40 Ringback/ring tone 60 RLS 59 Rls 14 Room Status 54 S Shared Directory Numbers 60 Special dial tone 60 Special Prefix Code (SPRE) Speed Call 60, 61 17 Speed Call on Private Lines Speed Call, System 18 19 65
Index Stored Number 21 Switchhook 60 System Speed Call 19 T Terms 60 Timed Recall Reminder V Voice Call 26 Volume adjustment Volume bar 66 59 7 30
While you are away from your desk: Call Forward 38
Title to and ownership of Meridian SL-1 software shall at all times remain with Northern Telecom. Meridian SL-1 software shall not be sold outright and the use thereof by the customer shall be subject to the parties entering into software agreements as specified by Northern Telecom. Information contained in this document is subject to change.
