Network Router User Manual

ADSL2+/3G Wireless N300 4-Port Modem Router YML15WN
34 www.netcomm.com.au
Update Firmware
The following screen appears when selecting Update Firmware. By following this screens steps, you can update your Routers rmware.
Manual device upgrades from a locally stored le can also be performed using the following screen.
1: Obtain an updated software image le
2: Enter the path and lename of the rmware image le in the Software File Name eld or click the Browse button to locate the
image le.
3: Click the Update Software button once to upload and install the le.
NOTE: The update process will take about 2 minutes to complete. The Router will reboot and the browser window will refresh to the default screen upon successful
installation. It is recommended that you compare the Software Version at the top of the Basic screen (WUI homepage) with the rmware version installed, to conrm the
installation was successful.
SNMP
The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings on remote
network devices. To do this, the administrator typically runs an SNMP management station program such as MIB browser on a local host
to obtain information from the SNMP agent, in this case the 3G15Wn (if SNMP enabled). An SNMP ‘community’ performs the function of
authenticating SNMP trafc. A ‘community name’ acts as a password that is typically shared among SNMP agents and managers.
Option Description
Read Community Read device settings
Set Community Read and change device settings
System Name Default = 3G15Wn
System Location User dened value
System Contact User dened value
Trap Manager IP IP address of admin machine