Network Router User Manual

ADSL2+/3G Wireless N300 4-Port Modem Router YML15WN
42 www.netcomm.com.au
To add a Trigger Port, simply click the Add button. The following will be displayed.
Option Description
Select an Application or
Custom Application
User should select the application from the list. Or
User can enter the name of their choice.
Trigger Port Start Enter the starting trigger port number (when you select custom application). When an
application is selected, the port ranges are automatically congured.
Trigger Port End Enter the ending trigger port number (when you select custom application). When an
application is selected, the port ranges are automatically congured.
Trigger Protocol TCP, TCP/UDP or UDP.
Open Port Start Enter the starting open port number (when you select custom application). When an
application is selected, the port ranges are automatically congured.
Open Port End Enter the ending open port number (when you select custom application). When an
application is selected, the port ranges are automatically congured.
Open Protocol TCP, TCP/UDP or UDP
DMZ Host
Your Router will forward IP packets from the Wireless Area Network (WAN) that do not belong to any of the applications congured in the
Virtual Servers table to the DMZ host computer.
Enter the computer’s IP address and click Apply to activate the DMZ host. Clear the IP address eld and click Apply to deactivate the DMZ
host.