Manual

NOVAK PRO SOLDER FLUX

Fast Wicking Liquid Flux Specially Chosen For The Highest Quality Solder

Joints When Used With Novak 3% Silver Solder & All Lead-Free Solders

For best results, always start with clean oxidation-free solder tabs

& freshly stripped wire. Use a high-quality soldering iron that can

supply the power required for the size of the soldering job--

Make

sure the iron’s tip is clean & in good condition for optimum performance

Apply a drop or two of ﬂux to the surface to be soldered

(the wire end

or solder tab)

. Melt a small amount of solder onto the iron’s tip, then

apply heat to the exposed wire with the iron and feed additional

solder from the side

(where the iron meets the wire)

to “tin” the exposed

wire. Next tin the surface the wire will be soldered to. Use the iron

to heat/melt the two tinned surfaces and join them together--

hold

the wire still while the solder joint is cooling to avoid a “cold” solder joint

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

(949) 916-6044 • Monday-Thursday

www.team n o v ak.com