Installation Instructions

ManualsBrandsNovatto ManualsBathVolle Glass Vessel Sink in Painted Brown

INSTALLATION

INSTRUCTIONS

Glass

Vessel

Sinks

Steps to Complete

Your Project

DIACCIO NOHP-G017

Please Note:

• Review and abide by all building and plumbing codes.

• Novao sinks need to be installed by a professional.

• Some counters require dierent cung methods; seek

the details of your chosen countertop material.

• Check to make sure the sink is sealed waterght.

Novao’s vessel sinks can be installed sing on the

countertop or recessed - up to a third or even half of the

sinks height. You may want to gure out your ideal vessel

sink height before you begin. The nished height is a

personal preference. Most vanity heights are set at 30”-

32”. Aer a vessel sink is mounted on top of the

counter, the vessel height will be 34”-36” unless it has

been recessed.

• Layout and place the sink and faucet of your choice in

the desired locaon. Using a pencil, mark the boom

of the sink hole and faucet base. Consider the ow of

the faucet when marking the locaon.

• Drill the countertop for sink drain opening with a

1 5/8” drill bit.

• Place the vessel on top of the counter and make sure

the drain ts down inside of the counter. If a

mounng ring is preferred, Novao provides them

in three nishes to match the faucet and drain. The

mounng ring elevates the sink ½”. It also provides

stabilizaon and more cleaning room underneath the

vessel. Due to design consideraons, a mounng ring

is not always necessary. To lower the height of the sink,

simply enlarge the hole. The larger the hole, the more

stability you will also achieve in installaon.

• Use a bead of clear silicone to seal between the

outside edge of vessel where it is mounted to the

mounng ring or counter.

• Use a level to ensure the vessel is level in every

direcon and install the drain.

• Secure the vessel to the counter with fastener on the

drain. Be sure to not over ghten the drain assembly.

Hand ghtening will be sucient. The breakage seen

with vessels is usually related with improper installa-

on of the drain.

When cleaning up aer installaon, do not use abrasive

cleaners. Ideally, the best way to care and keep your sink

like new is to protect it with Glacier Ice. This

nanotechnology will prevent any hard water spots or

oxidaon on the sink and faucet. For everyday cleaning

simply use a so cloth, soap and warm water.

Summary of content (1 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Steps to Complete Your Project DIACCIO NOHP-G017 Glass Vessel Sinks Please Note: • Review and abide by all building and plumbing codes. • Novatto sinks need to be installed by a professional. • Some counters require different cutting methods; seek the details of your chosen countertop material. • Check to make sure the sink is sealed watertight. Novatto’s vessel sinks can be installed sitting on the countertop or recessed - up to a third or even half of the sinks height.