Installation Instructions

General programmable sensor instructions

Before installing the sensor, be sure to read the installation

instructions carefully and operate according to the requirements:

1. Do not use sensors with damaged appearance;

2. The installation process should be operated by trained professionals

according to the guidance requirements;

3. The warranty period is 12 months or 20000 km, whichever comes first

Screw、Shell、Valve、Valve Cap

Product Name: Tpms Sensor

working voltage:3V

Emission current:6.7MA

Air pressure range:0-5.8Bar

Air pressure accuracy:±0.1Bar

Temperature accuracy:±3℃

PAGE 1
General programmable sensor instructions Before installing the sensor, be sure to read the installation instructions carefully and operate according to the requirements: 1. Do not use sensors with damaged appearance; 2. The installation process should be operated by trained professionals according to the guidance requirements; 3. The warranty period is 12 months or 20000 km, whichever comes first Screw、Shell、Valve、Valve Cap Product Name: Tpms Sensor working voltage:3V Emission current:6.
PAGE 2
working temperature:-40℃-105℃ working frequency: 314.985MHz/433.89MHz Product weight:21.8g Operation steps: 1. Before the sensor is installed, it should be programmed with ateq tool according to the model year; 2.
PAGE 3
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.