Owner manual

Test Result 1: Short circuit (SHORT)

It displays as follows if there is any short circuit in cable or terminal: (e.g.12

short circuit in the sample)

S h o r t :

1 2

At the moment,push key to restart testing or push key to return main

menu.Always correct short circuit error first and then start further

measurement.

Test Result 2: it will display as follows if the far-end of cable to be

checked does not insert into the far-end matcher (ID) or if the cable does

not into the local(L)in local test:

N o a d a p t e r:

At the moment, push key to restart testing or push key toreturn

main menu.

Test Result 3: Normal wiring diagram (WIREMAP) display

it will display wiring diagram (WIREMAP) as follows if it is found the far-

end matcher (ID) or the local port (L) on the far-end of cable to be checked:

W i r e m a p : pa s s

R: 12345678 id1

Iiiiiiii

M: 12345678

"R" means Remote unit " M" means Mian tester

At the moment, push key to restart testing or push key to return

main menu.

PAIR&L

Your excellent helper in cable test!