User guide

9
3. CLOCK MODE: Press HOUR and MIN to modify
existing settings. Press ENTER to save changes.
4. DATE MODE: Press MONTH, DATE and YEAR to
modify existing settings. Press ENTER to save
changes. DAY is automatically adjusted.
5. DSt MODE: Factory default is set at US standard
daylight savings dates noted by ON. To remove
daylight savings time setting, press DEL to
change screen to show OFF. DST may be activated
again by pressing DEL. Press ENTER to save
changes. To change from the standard DST month/
week/day setting press HOUR and refer to step 4.1.
6. HOLIDAY MODE: Press ENTER to advance to
desired holiday. Press MONTH and DATE to modify
start of holiday (ON) then press ENTER. Press
MONTH and DATE to modify end of holiday (OFF)
then press ENTER to save changes.
7. SCH MODE: To change schedule, press ENTER to
advance to desired event. Press HOUR, MIN, EVENT,
and DAY to modify time settings. Press DEL to delete.
Press ENTER after each modification to save changes.
NOTES:
1. Unit has a look back feature. Press the EVENT key
once (or twice for two circuit units) to activate current
schedule then EVENT key again to return to the
time (run) screen. Unit will automatically pick up the
last schedule.
2. To clear date and time only and provide unit with
a soft reboot, press and release the reset button that is
recessed under the small hole to right side of LCD
screen.
3. Clear all memory. To clear all memory, while in the
RUN mode, press ENTER, display will show:
Use the EVENT key to display: