User guide

14
The Light Level dial adjusts the foot-candle (fc) set
point for the control to turn ON. The load will be turned
OFF and continue to hold OFF when the light level is
twice this level or more. A timer program must be active
for the light level feature to function see “Planning Your
Program” below.
The Time Delay dial adjusts the amount of time before
the load turns ON or OFF due to light level change.
The range is between 1 and 100 seconds. To prevent
short-duration events such as clouds or stray lighting
from prematurely turning the load ON or OFF, select
longer time durations.
Single channel front panel controls are used if photo sensor EPC-A
(Included with DGLC100A) is connected. When the photo sensor is
connected, the control will follow a timer/light level logic.
Front Panel Controls
is for timer function only
SENSOR CALIBRATION LED
SENSOR CALIBRATION SWITCH