Installation Guide

INSTALLATION MANUAL
INSTALLATION
13
FRAMED CABINET
7/64”

Refer to the marking on brackets to determine the correct installation side and orientation.
Mate the corresponding bracket to the cabinet side frame, while placing rear end
of bracket against the wall. Use a pencil to mark 3 holes (there are 6 holes but only
3 are necessary).
Remove the bracket. Using a 7/64” drill bit, drill 3 holes where marked.
Assemble the bracket to the side frame using a Phillips screwdriver and 3 provided
no. 8 x 5/8” wood screws. Repeat for the other side frame.
6 ] Install the proper installation brackets according to the type of cabinet (framed or frameless).
See below.