Ventilation Hood User Manual

®
Architectural & Engineering Specifications
March 2004
DESCRIPTION
Remotely mounted fan reduces noise in occupied
areas.
• Use with adjustable inlet grilles to control flow for
any situation.
• Remote mounting provides flexibility in system
design.
High quality external rotor motor features long life,
efficiency and quiet operation.
Easy mounting to rafters or joist.
• Backward inclined centrifugal fan for strong air
delivery with minimal noise.
DESIGN FEATURES
Air Delivery: Model ILF120: 110 CFM at .2" S.P.
Model ILF130: 130 CFM at .2" S.P.
Model ILF250: 250 CFM at .2" S.P.
Sound Level: N/A -unit is remotely mounted
Material & Finish:
Housing: Durable polycarbonate plastic
Motor:
External rotor, ball bearing, 115 volts AC, 60Hz
;
ILF120 .37 amps.
ILF130 .37 amps
ILF250 .80 amps
Blower Wheel: Backward inclined centrifugal.
Duct Size: 4" diameter ILF120
5" diameter ILF130
6" diameter ILF250
INSTALLATION
• Not for use in cooking areas.
• Not for use in wet locations.
• Suitable for use with solid state speed controls.
• Housing mounts directly to bracket. Bracket
mounts to rafter or joist..
• Complete installation instructions included with
each unit.
• Switches and accessories available separately.
ARCHITECT'S SPECIFICATIONS
Exhaust Fan shall be Model ILF120, ILF130 or
ILF250 as manufactured by NuTone according to
listed specifications.
In-Line Fans
MODELS: ILF120, 130, 250
TYPICAL
INSTALLATION
ROOF CAP
FAN
DAMPER/SLEEVE
GRILLE

Summary of content (2 pages)