User Manual

119
5. Repeat steps 2 through 4 to add more maps.
6. Click the Upload button to activate all the settings.
The maximum file size of each map is 500KB. There are 10 layers of map, and the map
capacity of each layer is 10.
6.1.3 Edit Map
1. Make sure being in “Edit Mode” and all devices are inserted and connected.
2. Right click on the Map icon in Device and Map Tree List to obtain the
option menu to edit map, or just click the Edit Map button to configure.
3. Repeat step 2 to edit more maps.
4. Click the Upload button to activate all the settings.
6.1.4 Delete Map
1. Make sure being in “Edit Mode” and all devices are inserted and connected.
2. Right click on the Map icon in Device and Map Tree List to obtain the
option menu to delete map, or just click the Delete button.
3. Repeat step 2 to delete more map.
4. Click the Upload button to activate all the settings.
6.1.5 Add/Rotate Device Indicator
1. Make sure being in “Edit Mode” and all devices are inserted and connected.
2. Select the map which you want to add device indicator on.
3. Select a device from list and directly drag it to the desired location on the
map.
4. Select a camera indicator and right click on the indicator or click the Rotate
button to adjust the direction of camera indicator if needed.
5. Repeat steps 2 and 4 to add more indicators on.
6. Click the Upload button to activate all the settings.
6.1.6 Delete Device Indicator
1. Make sure being in “Edit Mode” and all devices are inserted and connected.
2. Select the indicator and right click on the indicator or click the Delete
button.
3. Repeat step 2 to delete more indicators.
4. Click the Upload button to activate all the settings.