User Manual

2. Settings

After setting up the unit, log in to the system by entering its IP address in the

browser (Internet Explorer 8 and later). When connecting, choose your

language, enter the username and password, and then begin using this

system.

There are five main functions of this unit: settings, live view, playback, help,

and logout. They will be shown on the top of the page. Current firmware

version and free storage capacity are shown above the function list.

2.1 Camera Setup

2.1.1 Add Cameras by Camera Search

The function enables user to automatically search and add cameras in the

same network. There are two search mechanisms, one is UPnP, another is

camera search tool. Before searching UPnP cameras, make sure that the

cameras possess UPnP function. Refer to camera support list.

1. Open Internet Explorer and log in to the unit.

2. Click IP Camera/ Camera Settings.

3. Click the Camera Search tab.