User Manual

29
2.2.3 Camera Events and Responding Actions Setup
1. Open Internet Explorer and log in to the unit.
2. Click Recording & Event / Event & Action Management.
3. Choose the camera, and then select one of the events. The event list
depends on camera its own ability.
 Connect lost: When a connection between the camera and this unit is
lost, the system will trigger an action.
 Motion from Camera: When video motion is detected, the camera
triggers an action.
 Input: Any external input can trigger an action.
When setting the event Motion from Camera, make sure to set up the camera’s
motion detection function first. Besides, event log will be recorded only if event is
selected on this page.
4. Click the Configure button to enable the event and select the active
period.