User Manual

33
recording or when disk is abnormal for accessing, the system will trigger
an action.
 Daily system report: Enable users to know the system information,
HDD usage, and Disk status everyday through Email without accessing to
the unit to check.
 Unable to access FTP: The action will be triggered when the connection
between the unit and FTP server is lost.
 Backup unfinished: If there is any file which the system didn’t
complete the backup process, the file(s) name will be listed and send out
through Email after finishing the last file of this backup schedule.
 Power-on notification: Record the time as power was turning on.
 Auto power-off notification: If overheat was happened, users will be
notified that power is auto off via Email.
5. Click the Add button to set up the responding actions of this event. Follow
the steps in the previous section.
6. Click the Save button.
Email and Push Notification is the only two actions to the event Daily system report,
Unable to access FTP, Backup unfinished, Power-on notification and Auto
power-off notification (overheat). In addition to select a contact, remember to
insert the time of sending daily system report.
2.2.6 Push Notification
1. Open Internet Explorer and log in to the unit.
2. Click Recording & Event / Event & Action Management.
3. Click the Event & Action tab.
4. Add Push Notification as a responding action for an event. Configure the
rearm interval and assign user(s).