User Manual

49
 Server Name: Name your unit.
Because of the internal data modifications required, it takes a few seconds to change
the name of your unit. Log in again after configuration activated.
 Internet Protocol: Choose to obtain an IP address from external DHCP
server automatically, or configure the IP address manually.
 IP Address: IP address of this unit.
 Subnet Mask: Subnet mask address.
 Default Gateway IP Address: Gateway IP address.
 Primary DNS: Primary DNS (Domain Name System) address.
 Secondary DNS: Secondary DNS address.
There are two Giga LANs in 4bay unit. We recommend using them under the scenario
of two subnets, one is for cameras/devices, and the other is for remote access. If you
deploy two LANs on the same subnet, it’s likely to make parts of camera disconnected
as either one of LAN is disconnected.
4. Click the DDNS Setup tab to enable Dynamic Domain Name Server
function, allowing you to connect unit with dynamic IP address.