User Manual

63
 Operating System: Embedded Linux
 NVR Version: NVR system version
 Device Pack Version: Camera package version
 CPU: CPU model number
 CPU Loading: The approx. CPU loading of this unit
 MAC Address: MAC address of this unit
 CPU Temperature
 System Fan Speed
 Locate: Click to trigger the buzzer to let you know where the unit is
2.7.2 Smart Fan Control
1. Open Internet Explorer and log in to the unit.
2. Click System / System Settings.
3. Click the Fan Control tab.
4. Check the Enable or Disable option.
5. Click the OK button.
2.7.3 Buzzer Configuration
There is a buzzer in the unit. When the unit finishes booting or when a problem
is detected, this buzzer will sound. This buzzer is enabled by default. You can
disable/enable this buzzer with the following steps. (We recommend that this
buzzer should be enabled.)
1. Open Internet Explorer and log in to the unit.
2. Click System / Settings.
3. Click the Buzzer tab.