User Manual

88
2. When video is being recorded, the icon will become a square . Click it
again to stop recording.
9.2.5 Audio
Press the speaker icons to enable / disable audio from a camera.
Please note that a camera must support audio for this function to work.
If your camera supports audio but you cannot hear that in
NuClient
, please
make
sure:
• Audio is enabled in the admin interface of the camera.
• Cables are properly connected.
•
Audio is not muted in Windows.
If multiple channels of video streams are running without enough bandwidth,
it is possible to hear audio of poor quality. To solve this issue, you may try
disconnecting a few cameras.
After switching to different layouts, if a camera is not present in the current
grid, you will not able to hear the audio of it.