User Manual

16
2.1 Camera Setup
2.1.1 Add Cameras by Camera Search
The function enables user to automatically search and add cameras in the
same network. There are two search mechanisms, one is UPnP, another is
camera search tool. Before searching UPnP cameras, make sure that the
cameras possess UPnP function. Refer to camera support list.
1. Log in to the unit.
2. Click IP Camera/ Camera Settings.
3. Click the Camera Search tab.
4. Click the Search button.
5. The system will list all the currently available cameras. The inserted
cameras are shown in blue. Click the icon to add a camera into your
camera list.
6. After clicking the icon, the camera setting page will pop up. Click the
item to which you want to add a camera.