User Manual

29
When setting the event Motion from Camera, make sure to set up the camera’s
motion detection function first. Besides, event log will be recorded only if event is
selected on this page.
4. Click the Configure button to enable the event and select the active
period.
 Always Active: The selected event is always active.
 Active only in the following period: The selected event is only active
in the designated time, which able to cover two days e.g. from 18:00 to
09:00.
 I/O Type: Check one of the options of I/O type. N/O means normal open,
while N/C means normal close.
5. Click the Add button to set up the responding actions of this event.
 Output: When an event occurs, the system will send an output signal to
other connected devices.

E-Mail: When an event occurs, the system will send e-mail notifications.
Make sure to add an e-mail address first.