User Manual

30
6. Click the action, and then click the Configure button to modify the details
of that action if necessary.
7. Click the Save button.
After selecting camera events, the event information will display on the screen when
it’s triggered.
2.2.4 I/O Box Input and Responding Action Setup
1. Log in to the unit.
2. Click Recording & Event / Event & Action Management.
3. Select an input of I/O Box from list.
4. Click the Add button to set up the responding actions of this event.
5. Click the action, and then click the Configure button to modify the details
of that action if necessary.
 Output: When an input is triggered, the system will send an output
signal to other connected devices.
 E-Mail: When an input is triggered, the system will send e-mail
notifications. Make sure to add an e-mail address first.
6. Click the Save button.
2.2.5 System Events and Responding Actions Setup
1. Log in to the unit.
2. Click Recording & Event / Event & Action Management.
3.
Click the Event & Action tab.
4. Click System to unfold the list of system events, and then select one of the