User Manual

5. Refer to the section of Create a RAID Volume to create a volume for it.

You can either create a volume with eSATA and embedded disk(s), or

create an isolate volume with eSATA disk only.

4.3 Create an External Storage on iSCSI

1. Log in to the unit.

2. Click RAID & File System / iSCSI initiator

3. Fill in the IP address and port (default 3260) for iSCSI, and click “Discover”

4. You will see the iSCSI you discovered.

5. Log on each disk on Target. If you have set password on iSCSI, choose

CHAP to log on. If not, choose “None”.