Installation Sheet
Satco Products, Inc.
Brentwood, NY 11717© Copyright 2020 Satco Products, Inc. 12/20
1
WARNING: Risk of Fire or Electric Shock
• To avoid damage, falling, electric shock or re, do not modify the lamp or
replace accessories without conrming with the supplier rst.
• Only authorized, qualied personnel should install this xture and should
follow the owner’s manual. Any improper installation might cause failure,
electric shock, re or other injury, damage or hazard.
• Disconnect power before installation or any maintenance of the xture.
• Do not dismantle the xture without the supplier’s authorization.
• Do not touch the power supply when the xture is operating.
• The external flexible cable or cord of this xture cannot be replaced; if the
cord is damaged, the xture shall be destroyed.
• Terminal block not included. The electrical tting must be installed by a
licensed electrician.
• For use in environments where an accumulation of non-conductive dust
on the xture may be expected.
IMPORTANT: This product must be installed in accordance with the
applicable installation code by a person familiar with the construction and
operation of the product and the hazards involved.
LED UFO HIGH BAY
Models: 65-781, 65-782, 65-783, 65-784, 65-785, 65-786, 65-787, 65-788,
65-791, 65-792, 65-793, 65-794, 65-795, 65-796, 65-797, 65-798,
65-801, 65-802, 65-803, 65-804, 65-805, 65-806, 65-807, 65-808
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
SPECIFICATIONS
Model CCT Volts CRI
Operating
Temperature
65-781 4000K
100-277V 80
-40°C to +45°C
(-40°F to +113°F)
65-782 5000K
65-783 4000K
65-784 5000K
65-785 4000K
65-786 5000K
65-787 4000K
65-788 5000K
65-791 4000K
65-792 5000K
65-793 4000K
65-794 5000K
Model CCT Volts CRI
Operating
Temperature
65-795 4000K 120-277V
80
-40°C to +45°C
(-40°F to +113°F)
65-796 5000K 120-277V
65-797 4000K 120-277V
65-798 5000K 120-277V
65-801 4000K 200-480V
65-802 5000K 200-480V
65-803 4000K 200-480V
65-804 5000K 200-480V
65-805 4000K 200-480V
65-806 5000K 200-480V
65-807 4000K 200-480V
65-808 5000K 200-480V
WIRING DIAGRAM & INSTRUCTIONS
The LED high bay light can be equipped with an
optional DC motion sensor (86/218). The sensor
needs to be set via remote (86/219). For standard
0-10V dimming applications, the dimming cable must
be cut free from the integrated DC sensor port.
65-781, 65-782, 65-783, 65-784,
65-791, 65-792, 65-793, 65-794,
65-801, 65-802, 65-803, 65-804
:
ø11 13/6" (300mm)
65-784, 65-785, 65-787, 65-788,
65-795, 65-796, 65-797, 65-798,
65-805, 65-806, 65-807, 65-808
:
ø14 3/16" (360mm)
A B: Motion Sensor