E10 or ek Amie ME Be rem lt Ge ey anons modeled In Hs rocket rs rear of the epoch conspiracies th do it ocher wd aro Tor Wht ats sari cor of is a, Chou Thad Co. hae 0 Preston dramatizes hing te cairn. 'WARNING-IMPORTANT SAFETY INSTRUCTIONS SPL TL Te RIE ric tsk of or sat she, tr ces | COMM: To occ rio osc sok, dot ros ‘His apple fo ran mos. va. Ho ne antarctic Dr eke, eh birdcage 0 quaffed CAR Th paper ha bow atc ar wv Cody wit Bm rks or a Cs shale dead pursuit 1 of CC Pu's.
Control panel DI Toggle Out Toggle have : i Hor ELE Control panel Blond Knob Adjusts overdrive signal mix with the dry signal between 50% and 100%. Volume Knob Adjusts the output volume. Bass Knob Adjusts the low frequency love, Wile Knob Adjusts the selected middle frequency level. Freq Knock You can choose any frequency to adjust from low mid 150 Hz to high mid 940 Hz. Arable Knob Adjusts the high frequency. Drive Knob Adjusts the overdrive level {can be activated with DRIVE switchover.
Control panel Control panel Diva Foot Switch Engage / disengage the overdrive, Input to DI Signal Routing Toggle | 1/4" Man Output Micro B USB Input Also Walsh at Push and hold the Drive foot switch for 1.5 seconds, he green LED light wil start 1 bin. Now you can control the noise gate Decay by Blend knob, and Gate Threshold by Drive knob. When you tum the Threshold to 0, nose gate wil be OFF: Decay: Adjusts the speed of the noise ats. Threshold: Adjusts the gate level. Hold the Drive foutswtich for 1.
Control panel 1/4° Through Ont put Dry signal output, If you want to connect the pedal to the amplifier In front. You can naval the pedal's preamble section and use the amplifier's preamble. Speaker cabinet simulation nat supported. 1/4” Wain Output The main output, you can get the processed sound from preemptive action. Speaker ‘cabinet simulation can be activated/deactivated. Micro B USB Input You connect to the computer for updates, software control and audio streaming.