Cut Sheet

455 MALLEABLE SPLIT RING HANGER, EG, 1 1/2" PIPE, 1.9" OD, 3/8" ROD

CATALOG NUMBER

4550150EG

FEATURES

Recommended for the suspension of stationary non-insulated pipe lines

Allows for piping runs close to ceiling or walls

Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)

PRODUCT ATTRIBUTES

Material: Cast Iron

Finish: Electrogalvanized

Pipe Size: 1 1/2"

Outer Diameter: 1.900"

Rod Size: 3/8"

A: 2 5/8"

B: 1/2"

Static Load: 180 lb

ADDITIONAL PRODUCT DETAILS

Bolt and rivet are carbon steel.

PAGE 1
455 MALLEABLE SPLIT RING HANGER, EG, 1 1/2" PIPE, 1.9" OD, 3/8" ROD CATALOG NUMBER 4550150EG FEATURES Recommended for the suspension of stationary non-insulated pipe lines Allows for piping runs close to ceiling or walls Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12) PRODUCT ATTRIBUTES Material: Cast Iron Finish: Electrogalvanized Pipe Size: 1 1/2" Outer Diameter: 1.
PAGE 2
DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. North America Europe Europe APAC +1.