Cut Sheet

SINGLE PIECE STRUT CLAMP FOR CABLE/CONDUIT, 2.72"–3.5" OD, 3" EMT 3"

RIGID

CATALOG NUMBER

SCH56B

CERTIFICATIONS

FEATURES

One-piece cable/conduit clamp with protective boot

No screws or bolts to drop

Requires only a screwdriver or nutdriver for installation

Fits into open side of strut channel

FM® Specification Tested (from 1/2" to 4" of EMT Conduit Size)

PRODUCT ATTRIBUTES

Material: Steel

Finish: Electrogalvanized

Outer Diameter: 2.720" – 3.500"

EMT Conduit Size: 3"

Rigid Conduit/Pipe Size: 3"

PAGE 1
SINGLE PIECE STRUT CLAMP FOR CABLE/CONDUIT, 2.72"–3.5" OD, 3" EMT 3" RIGID CATALOG NUMBER SCH56B CERTIFICATIONS FEATURES One-piece cable/conduit clamp with protective boot No screws or bolts to drop Requires only a screwdriver or nutdriver for installation Fits into open side of strut channel FM® Specification Tested (from 1/2" to 4" of EMT Conduit Size) PRODUCT ATTRIBUTES Material: Steel Finish: Electrogalvanized Outer Diameter: 2.720" – 3.
PAGE 2
Static Load 1: 350 lb Ultimate Static Load 2: 75 lb Ultimate Static Load 3: 50 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.