Cut Sheet

COOLING Floor Brush Kits
PH 763.422.2661nVent.com/HOFFMAN NETWORKING 2
Spec-00551 E
2PIECE FLUSHMOUNT FLOOR BRUSH KIT WITH
COVER
Use Flush-Mount Floor Brush Kit with removable brush and solid
cover for new installations. Install two kits when large bundles of
cables are needed.
Removable back brush allows floor tile removal without
disconnecting cables. There’s no need for an oversized cutout
because the removable back brush allows large connectors to pass
through the grommet.
Removable solid safety cover allows installation of the grommet
during the construction phase and eliminates the risk of injury by
stepping through the grommet opening. OSHA jobsite standards
require open holes in floor panels to be covered.
NEC, UL and NEMA require safety covers and cable protection
against sharp edges.
Bulletin: DAccY
Catalog Number
Description
Max. H x W x D
in./mm
Cable Egress
in./mm
DFB410F Flush-Mount Floor Brush with
cover and removable brush
6.31 x 12.81 x 1.62
160 x 325 x 41
3.50 x 9.50
89 x 241
1PIECE FLUSHMOUNT FLOOR BRUSH KIT WITH
COVER AND TWOSTAGE SEALING
Flush-Mount Floor Brush Kit with Cover is a heavy-duty two-stage
sealing system. Brush and EPDM gasket provide the most effective
air seal.
Heavy-duty, integrated safety cover allows installation of the
grommet during the construction phase and eliminates the risk
of injury by stepping through the grommet opening. OSHA jobsite
standards require open holes in floor panels to be covered.
Easy-to-install system integrates with the access floor static
dissipative system.
NEC, UL and NEMA require safety covers and cable protection
against sharp edges.
Bulletin: DAccY
Catalog Number
Description
Cable Egress
in./mm
DFB57F Flush-Mount Floor Brush
Kit with Cover
7.49 x 4.86
190 x 123