Union Robotics Hegel ink Blue Overview Here link Blue is an integrated remote controller, ground station and wireless digital transmission system designed to be used with the Cube Autopilot, Duplicator PX4.
130 3 05S £505 customization Marvin buttons and Mavlink/Sbus hardware wheel, ® Tether and share video and telemetry via wife ground station such as Mission Planner. # Onboard Arm Cortex AS3 & Cortex A53 S0C in both air and ground units for custom applications.
Feature Screen: Audio: Remote control: Wireless: Inputs: Antenna; Power: Charging : Power consumption: Size: Air Unit Specification 5.46 inch 1080P, 16 million colors, capacities tout screen Built-in speaker x 1, builtin microphone x 2 Hall affect gimbals with removable sticks x 2, screw wheel x 1, bottom button * 6 with back light, top bunion x 1 (right) Bluetooth / WIFI / GPS / 2.46 map transmission ground Microbe = 1, Micro SD x 1 (supports maximum 64GB) 2.4GHz (1.
Feature Video-input: Power Input Telemetry: Control Output use: Antenna; Size: ook Blue Ak Ul Specification Micro HDMI x 2: Input for textual camera video, supports 720P fps & 10B0P 30/60 hs 2 Pin interface x 1: Recommended supply voltage ~7V: minimum 6v: maximum 12V and avoid sharing BEC with servos, the average power consumption of the single-sided module is less than 4W 3 Pin interface x / BV level ART interface Linkman Compatible 4 Pin interface x 1: Two 3.3V level RC output connectors (5.
Antennas: Signal Bandwidth: Power Consumption: Air Unit LED LED 1 (left) Feature Steady Green Light: Steady Red Light Steady Yellow Light Changing Green-Yellow-Red Light Mao Light LED 2 (right) Feature Flashing Green Light Steady Green Light: Steady Yellow Light Flashing Red Light: No Light 2% circularly polarized antenna 1.
Air Unit Interface & Installation Connector Inputs via fh | . HDMI 2: Micro HDMI, for video input . HDMI 1: Micro HDMI, for video input (preferred) . Power: 6V 12.6 max (3s Lip supported) power input "avoid sharing BEC with servos Micro USB: For debug or upgrade, support OTG . Airfreight For pairing and rest . LED 1.2: To indicate pairing status and transmission status . ART. ART . 5 bus: Tow 3.
Pin # | Name Description JAKARTA (3:Pin J ST-GH) ui 1 RYD RX of rover module Trot rover module 3 GND Ground Pin Fin# | Name Description Sh bus (4-Pin J ST-GH) oh i Shutout 1 RX of rover module GND Ground Pin 3 RSV For future use a GND Ground Pi A Unit Ple Gut Connector Routing Connect Sous to RCN on Flight Controller Connect ART to TEEM 1 an Flight Controller .
| K Tone sn iit 12.6V max Power Supply Camera HDMEInpUy/FRV (3s Lip supported) A Unk Connection installation + Mount the Rover Unit securely fo the drone + {Choose the best position to attache the rover unit antennas. + Connect the antennas to ANT 1, ANT 2 (MC) on the Rover unit There shall be no metal parts or any conductor attached to the antennas. + Connect 5.bus on the Rover Unit to the RC IN on the Flight Controller. + Connect ART on the Rover munition the TEEM 1 or TEEM 2 on the Flight Controller.
Hazel ink Blue Ground Smithson Diversions Feature Housing: Dimensions: Weight Screen: Audio: Remote Control: Communication: LED: Interface: Antenna: Fowler: Charging: Power Consumption: Ground Station Buttons & LED Specification 6061 Aluminum 245mm x 118mm x 40mm not including external antenna and joystick 920g (wf antennas) 5.486 inch, 1080P, 16 Million Colors, Capacities Touch Screen Lx Built-in Speaker, 2x Builtin Microphone 2x Joystick, 1x Wheel, 8x Button, 1x Upper Right Button WINGTIPS 2.